Chevy-GMC 2500-3500 10-12 Inch Lift Kit 2011-2015


Chevy-GMC 2500-3500 10-12 Inch Lift Kit 2011-2015

Why Bulletproof Suspension Kit?

The new Chevy-GMC 2500-3500 10-12 Inch Lift Kit Bulletproof Suspension system for the 2011 – 2015 Chevy HD is a real knock out. Unmatched in quality and strength, Bulletproof Suspension has cut no corners and uses only A36 steel plate 1/4” thick or thicker and heavy wall D.O.M. seamless steel tubing.. Attention to detail and engineering enhancements make a Bulletproof Suspension lifted truck a joy to drive as well.

Bulletproof Suspension Inc has designed a 10-12 Inch Suspension System with the best engineering and superior quality. Bulletproof Suspension Inc has set the stage for the industry by being the first and the best HD lift kit on the market. Bulletproof Suspension uses continuous seam welding with our gusseted truss constructed.
The Bulletproof Suspension Chevy 2500 10-12 Inch Lift Kit features a one piece lift cage, w/ aircraft grade Chromoly 9- piece Heim outer steering with 4140 hardened steel bushings, differential drop brackets (4WD), sway bar links, Uni-Ball A-arms up-grade is available. Six shocks are required for this system and we offer Standard Shocks or Fox Racing Shocks as options. complete instructions with photos and hardware kit labeled for each step of the installation. We here at
Bulletproof Suspension Inc. recommend Atlas Rear Leaf springs (quoted separately). No blocks, “Add-A-Leaf” or shackle extensions on our kit. At Bulletproof Suspension Inc. we don’t cut corners and set you up right from the start. Our Dual Shock system comes standard on the 10″ – 12″ kit for the Chevy 2500 HD.

2011-2015 Chevy 2500 HD’s have a reputation for wearing out factory idler arms especially when you install 38-40″ tires. Our engineers here at Bulletproof Suspension Inc designed our kit to eliminate the factory idler arm. The pitman arm powers the Bulletproof Suspension Inc steering system and allows
your tire choice to turn freely without effort or strain on the system. Bulletproof Suspension’s 2500 HD lift kit systems tie rods, center-link and drag-link are made out of 1-1/8″ O.D. .219″ wall thickness D.O.M. Tubing attached at all ends with our seven piece chromoly steel heim rod ends. This system is
definitely “Bulletproof”.

Bulletproof Suspension Inc. drops the differential full amount of the lift to maintain the suspension within factory specification and eliminate any extreme angles that come with other lift kits. In addition, bump stops and droop stops are added to ensure that there will be no over extending, compressing or
binding in your suspension system. We here at Bulletproof Suspension Inc. know that your vehicle is important to you, so we designed our 2500 HD kit so that there is no need to remove the main boss from the differential like most of our competitors do. Keeping your critical factory components in tact is
essential and not doing that is just a cheap short cut. Another critical factory aspect of you truck is wheel track and wheel base. Bulletproof Suspension Inc.
maintains the factory spindles keeping your track and wheel base and off-set stock. We also include Bulletproof Suspension Inc torsion keys giving you the option of taking your truck up to a full 12″ of lift (hence the 10-12″ ability).

*this kit will require the front drive shaft to be extended 1 1/2″

*life time warranty doesn’t cover wearable items such as Shocks, Heim Joints, Bushings, Ball Joints, ect.

it Features

Fits 2011-2015 Chevrolet 2500 HD 2WD/4WD Regular, Double & Crew Cab short/long bed. All the Bulletproof Suspension built parts will come in a glossy black powder coat. (Custom colors available)
Bulletproof Suspension offers a Life time transferable warranty on all parts manufactured Bulletproof Suspension Inc. Factory wheel base and track maintained. No welding required kit is designed to be entirely “bolt on”.

Required Parts:

  1. Bulletproof Kit                                                                          $3,950.00
  2. F&R Standard Shocks                                                             $59.00 x 6
  3. Atlas Springs                                                                             $990.00(set)
  4. Total cost complete                                                                  $5,294.00

Upgrade Options:

  1. Bulletproof  Remote Res shocks                                             $275.00 x 6
  2. Uniball A-Arms                                                                          $250.00(set)
  3. Rear traction bars                                                                      $950.00(set)
  4. Billet Shock clamps                                                                    $25.00 x 12

Tire size 38”-40″ Wheels 4 ½  backspacing

Kit Includes

  1. One piece cage
  2. Upper a-arm drop downs
  3. Torsion drop downs
  4. 6 Hole differential drop downs
  5. Differential shackle
  6. Dual shock hoops
  7. Dual shock upper arms
  8. Impact bars
  9. Drag link
  10. Tie rods
  11. Center link
  12. Shock hoop washer
  13. Bolt locker
  14. Complete hardware kit

To find more please visit: www.bulletproofsuspension.net or give us a call at 909.389.0444

Advertisements
By Bulletproof Suspension Inc. Posted in Uncategorized

Chevy-GMC 1500 10-12 Inch Lift Kit 2014-2015


Chevy-GMC 1500 10-12 Inch Lift Kit 2014-2015

Kit Features

This Bulletproof Suspension Chevy-GMC 1500 10-12 Inch Lift Kit will fit 2014-2015 Chevy, 1500 2wd and 4wd models, Extended cab, crew cab, reg cab, both short and long beds. . All the Bulletproof Suspension manufactured parts are coated in a glossy black powder coat, so the kit is ready to be installed right out of the box. Other color options are available at a additional cost. Bulletproof Suspension kits require no welding. (some minor cutting/trimming may be involved with some vehicles).  Bulletproof Suspension designed this kit to keep the factory track width and alignment specs.  With this kit you will be able to run  37″ x 13.50  up to 38 x 13.50 Tires, recommended back spacing for wheel is 4 1/2″.

Bulletproof Suspension only uses the best when manufacturing your kit, We use A36 Steel Plate 1/4″ thick or thicker and heavy wall DOM, Seamless steel tubing, and continuous seam welding.

Bulletproof Suspension’s 10″ 12″  Kit for 2014-2015 Chevy and GMC 1500 models uses a one piece lift cage that is truss re-enforced, and heavy duty coil spacers, differential drops for 4wd models, Upper Control arm drops, Impact bars, Upper Control arms with ball joints, upgraded tie rod ends (Heim joints) Steering brackets and extensions. The Bulletproof Suspension kit was designed to keep all angels as close to factory specs as possible to prevent any hard angels, binding or bump steering.  The Bulletproof Suspension kit will work with Stabilitrack and auto ride models.

*front drive shafts need to be extended 1 1/2 ”

Denali Models require after market CV shafts, shafts can be purchased through Bulletproof Suspension.

*lift time warranty doesn’t cover wearable parts like, ball joints, bushings, Heim joints, Uniballs and shocks.

Required Parts for complete kit:

  1. Bulletproof Kit                                                     $3,490.00
  2. Standard  Rear Shocks                                       $59.00 x 2
  3. Atlas leaf springs                                                 $860.00(set)
  4. Total Cost for complete kit                                $4,468.00*

Upgrade Options:

  1. Bulletproof Suspension remote reservoir shocks         $275.00 x 2
  2. Bulletproof Suspension Coil overs and springs            $775.00 x 2
  3. Bulletproof Suspension billet shock clamps                 $25.00 x 4
  4. Uniball Upper Control arm upgrade                              $250.00(set)
  5. Rear Traction bars                                                        $750.00(set)

Shipping charges and any Tax’s that may apply are not included in above pricing.

Bulletproof Suspension kit includes

  1. One Piece lift cage
  2. Upper Control Arms
  3. Upper Control Arm drops
  4. Upper Control Arm Cross Member
  5. Differential Drops
  6. Sway bar drops
  7. Tie rod extension and Heim Joints
  8. Coil spacers
  9. Brake Lines
  10. Steering extensions
  11. steering mount
  12. Impact bars
  13. Complete Hardware kit.

To find more please visit: www.bulletproofsuspension.net or give us a call at 909.389.0444

By Bulletproof Suspension Inc. Posted in Uncategorized

Chevy-GMC 1500 6-8 Inch Lift Kit 2014-2015


Chevy-GMC 1500 6-8 Inch Lift Kit 2014-2015

When you Install a Bulletproof Suspension expertly engineered Chevy-GMC 1500 6-8 Inch Lift Kit, you will be joining the ranks of satisfied customers that have been provided unmatched durability, while maintaining a great ride. Our unique one piece cage is designed with truss bar supports, and steering drop down system drops the factory suspension insuring that the factory steering and CV axle angles will remain within factory specifications. Also included are Bulletproof Suspension new heavy duty fabricated spindles. On top of all that, the Stabilitrak system on 2009 models and up function normally with no need for modification or re-programming.

The kit comes with complete step by step instructions w/ images. Complete hardware kit provided and packaged separately labeled for each step of the installation. If you get in a bind, just call our tech line and we will be glad to guide you through any difficulties that may occur.

Bulletproof Suspension offers a life time transferable warranty on all parts manufactured by Bulletproof Suspension. The Bulletproof Suspension kit also comes coated in a glossy black powder coat, so it is ready to install right out of the box. (Other color options available at additional cost)

*life time warranty doesn’t cover wearable parts like, Ball joints, Uniballs, Heim Joints, Bushing or Shocks.

Required Parts for complete kit:

  1. Bulletproof Kit                                                        $2,550.00
  2. Standard  Rear Shocks                                          $59.00 x 2
  3. Total Cost Complete kit                                        $2,668.00

Upgrade Options:

  1. Atlas springs                                                   $790.00(set)
  2. Bulletproof  Shocks                                       $275.00 x 2
  3. Bulletproof Coil Overs                                  $775.00 x 2
  4. Rear traction bars                                          $700.00(set)
  5. Billet  clamps                                                   $25.00 x 4

Shipping Charges and any Tax’s that may apply are not included in above pricing.

Bulletproof Suspension Kit Includes

  1. One Piece lift cage
  2. Impact bars
  3. sway bar drops
  4. coil over spacers
  5. Rear lift block
  6. Differential drops
  7. Upper Control arm cross member
  8. Fabricated Spindles
  • Designed to 35″  x 12.5″  tires with a wheel back spacing of 4 1/2″
  • Designed to fit 2014 -2015 Chevy and GMC 1500 2wd and 4wd
  • Overall tire track width remains factory
  • No drive line modifications required (Denali requires a CV front drive shaft, yes it fits a Denali)

To find more please  visit: www.bulletproofsuspension.net or give us a call at 909.389.0444

By Bulletproof Suspension Inc. Posted in Uncategorized

2008-2014 Toyota Sequoia 10-12 Inch Lift Kit


Bulletproof Suspension has done it once again. Looking to lift your Toyota Sequoia 10″ – 12″?

Well Bulletproof has the kit for you.

BPS_2011_Toyota_Sequoia_07

Bulletproof suspension designed Toyota Sequoia 10-12 Inch Lift Kit to fit 2008-2014 2wd and 4wd models. All Bulletproof Suspension manufactured parts are coated in a glossy black powder coat, and are covered by the Bulletproof Suspension Life time transferable warranty.  All components are made from A36 steel plate, 1/4″ thick or thicker and heavy wall D.O.M.(drawn over mandrel) seamless steel tubing. We use continuous seam welding and our spindles are of box construction internally gusseted and rosette welded.

*Life time warranty doesn’t include wearable items like Shocks/struts, heim joints, ball joints, uniballs or bushings.

Sequoia-Layout

Required Parts For Complete Kit:

  1. Bulletproof Front Kit                                                       $3200.00
  2. Bulletproof Rear Kit                                                       $3200.00
  3. Rear Std. Shocks                                                               $118.00(set of 2)
  4. Total cost for complete kit                                              $6,518.00

Upgrade Options:

  1. Remote Res Shocks                                                        $550.00( set of 2)
  2. Bulletproof Coil Overs/springs                                    $1550.00(set of 2)
  3. Billet shock clamps                                                         $100.00(set of 4)
  4. Tires 37”- 38” Wheels 4 ½ backspacing

Shipping charges and any Taxes that may apply are not included in above prices.

Kit includes

  1. Front and rear one piece cage
  2. Front and rear coil spacers
  3. Front and rear UCA drops
  4. Front and rear sway bar drops
  5. Front spindles
  6. Impact bars
  7. Differential brackets
  8. Complete hardware kit

IMG_0355

IMG_0363

To find more please  visit: www.bulletproofsuspension.net or give us a call at 909.389.0444

By Bulletproof Suspension Inc. Posted in Uncategorized

2005-2015 Toyota Tacoma 10-12 Inch Lift Kit


Why Choose A Bulletproof Suspension System for your Toyota Tacoma 10-12 Inch?

Searching for the ultimate lift kit system for your 2005+ Toyota Tacoma 10-12 Inch 2wd/4wd?

tacoma3

Your search is over.

Bulletproof Suspension Inc. has designed Toyota Tacoma 10-12 Inch Suspension Kit with the best leading design and engineering that can only come from Bulletproof Suspension Inc.

All components are made from A36 steel plate 1/4″ thick or thicker and heavy wall D.O.M.(drawn over mandrel) seamless steel tubing. We use continuous seam welding with gusseted truss type construction. We call it “Bulletproof” because it is.

Our Bulletproof kit features a one piece lift cage, Fabricated spindle uprights w/ aircraft grade Chromoly Heim outer steering, Upgraded inner tie rods for more strength and articulation, Heavy duty coil over spacers, Atlas Rear Leaf springs (quoted separately – no blocks or shackle extensions on our kit), differential drop brackets (4WD), sway bar brackets, Standard Uni-Ball A-Arms and a complete instructions booklet with photos and hardware kit labeled for each step of the installation.

IMG_6714.JPG

2005-2015 Toyota Tacoma 10- 12 Inch 2wd/4wd

Required Parts For Complete Kit:

  1. Bulletproof Kit                                               $3490.00
  2. Atlas Leaf Springs                                         $860.00 (set of 2)
  3. CV Front Shaft                                               $600.00
  4. Rear Std. Shocks                                            $118.00(set of 2)
  5. Rear Traction Bars                                        $750.0.00(set of 2)
  6. Total cost complete kit                                  $5,818.00

Upgrade Options:

  1. Bulletproof  Remote res Shocks                             $550.00(set of 2)
  2. Bulletproof Coil Overs/Springs                              $1550.00(set of 2)
  3. Billet Clamps                                                              $100.00(set of 4)

Tire sizes 37” – 38” wheel back space 4 ½”

Shipping charges and any Taxes that may apply are not included in above prices.

2014 065

An Overview

  • Fits 2005+ Toyota Tacoma 2WD/4WD
  • All parts are covered in high quality gloss black powder coat (color upgrades available).
  • Factory wheel base and track maintained.
  • Upgraded Steering, New inner and Outer ties rods provided with kit
  • Wear resistant urethane bushings
  • Stainless steel braided brake lines.
  • Aftermarket Coilovers and shocks available
  • No welding required and kit is designed to be entirely “bolt on”
  • All Bulletproof manufactured parts are covered by a lifetime transferable warranty.

To find more please  visit: www.bulletproofsuspension.net or give us a call at 909.389.0444

By Bulletproof Suspension Inc. Posted in Uncategorized

2007-2015 Toyota Tundra 6-8 Inch Lift Kit


2014 116

Bulletproof Suspension has added yet another kit to the line up, With the great successes of the Bulletproof Suspension’s Toyota Tundra 10-12 Inch Lift kit we are excited about the release of the Toyota Tundra 6-8 Inch Bulletproof Suspension Lift Kit. This kit still includes all the great features as the 10-12 Inch Kit. The 6-8 Inch kit will work on the 2007-2015 Toyota Tundra 2wd and 4wd models, and just like the 10-12 Inch kit its all bolt on. (Minor cutting required)  There is NO welding required with this kit. The complete kit will included new Uniball upper control arms, heavy duty spindles, and massive once piece cage and high quality Chromoly Heim joints to replace those factory tie rod ends. With many upgrade available like the Bulletproof Suspension coil overs and springs, Remote Reservoir shocks and full 6″ over stock Atlas leaf springs this kit has it all. To finish off this already great kit all the Bulletproof Suspension made parts are cover in a glossy black powder coat, so out of the box its ready to be installed. We also offer custom powder coat colors upon request.

Tonka Tundra 023

Required Parts to complete kit:

  1. Bulletproof Kit                                                                     $2,850.00
  2. Standard  Rear Shocks                                                       $118.00(set of 2)
  3. Total cost complete kit                                                       $2,968.00

Upgrade Options:

  1. Atlas springs 6”                                                            $790.00(set of 2)
  2. Bulletproof res shocks                                                 $550.00(set of 2)
  3. Bulletproof coil overs/spr                                           $1550.00(set of 2)
  4. Billet shock clamps                                                       $100.00(set of 4)
  5. Rear traction bars                                                         $700.00 (set of 2)

Tire size 35” wheel back spacing 4 ½

Shipping charges and any Taxes that may apply are not included in above prices.

Kit Includes

  1. Uniball Upper Control Arms
  2. Heavy duty Spindles
  3. One Piece cage
  4. Diff drop
  5. Sway bar drops
  6. Rear drive line drop
  7. Upgraded Chromoly Heim Joint Steering
  8. Rear lift blocks

2014 115

To find more please  visit: www.bulletproofsuspension.net or give us a call at 909.389.0444

By Bulletproof Suspension Inc. Posted in Uncategorized

2007-2015 Toyota Tundra 10″ 12” Lift Kit


Looking to install 37-38″ tires up to 13.5″ wide on your 2007-2015 Toyota Tundra?

SKIFF 066-001

Well look no further.

Bulletproof Suspension Inc. has designed a Toyota Tundra 10-12 Inch Lift Kit Suspension System with the best engineering and superior quality Bulletproof Suspension is recognized for. Our Bulletproof Suspension for Toyota Tundra system sets the bar for the industry. All components are made from A36 steel plate, 1/4″ thick or thicker and heavy wall D.O.M.(drawn over mandrel) seamless steel tubing. We use continuous seam welding and our spindles are of box construction internally gusseted and rosette welded. Our Toyota kit for it’s name sake is “Bulletproof”.

Our Bulletproof kit features a one piece lift cage, Fabricated spindle uprights w/ aircraft grade Chromoly Heim outer steering, Heavy duty coil over spacers, Atlas Rear Leaf springs (quoted separately – no blocks or shackle extensions on our kit), differential drop brackets (4WD), sway bar drops, sway bar links, Standard Uni-Ball A-Arms and a complete instructions booklet with photos and hardware kit labeled for each step of the installation.

sema 2012 003

Required Parts for complete kit:

  1. Bulletproof Kit                                                                  $3490.00
  2. Atlas Leaf Springs                                                            $860.00(set of 2)
  3. Rear Standard Shocks                                                     $118.00 (set of 2)
  4. Total cost complete kit                                                    $4,468.00

Upgrade Options:

  1. Rear Bulletproof Shocks (By ICON)                   $550.00(set of 2)
  2. Bulletproof Coil overs w/springs (By ICON)    $1550.00(set of 2)
  3. Bolt in Traction Bars                                             $700.00(set of 2)
  4. Billet Clamps                                                          $100.00 (set of 4)

Tire Size: 37”-38”

Shipping and any Taxes that may apply are not included in above prices.

2014 sema show 001

An Overview

  • Fits 2007-2015 Toyota Tundra 2WD/4WD Regular/Double Cab & Crew Max short/long bed.
  • All parts are covered in high quality gloss black powder coat (color upgrades available).
  • Factory wheel base and track maintained.
  • Wear resistant urethane bushings.
  • Improved ride & handling from factory.
  • No drive shaft modifications required on 4WD applications.
  • No welding required and kit is designed to be entirely “bolt on”
  • All Bulletproof manufactured parts are covered by a lifetime transferable warranty.
To find more please  visit: www.bulletproofsuspension.net or give us a call at 909.389.0444
By Bulletproof Suspension Inc. Posted in Uncategorized

Chevy-GMC 10-12 Inch Lift Kit 2007-2015 Tahoe Suburban Yukon Escalade Avalanche 4wd/2wd


07 6'' tah wht b

Kit Features

This Chevy-GMC 10-12 Inch  Bulletproof Suspension Lift Kit will fit 2007-2015 Chevy, GMC and Cadillac SUV’S. All the Bulletproof Suspension manufactured parts are coated in a glossy black powder coat, so the kit is ready to be installed right out of the box. Other color options are available at a additional cost. Bulletproof Suspension kits require no welding or major cutting. (some minor cutting/trimming may be involved with some vehicles).  Bulletproof Suspension designed this kit to keep the factory track width and alignment specs.  With this kit you will be able to run up to 37″ x 13.50 Tires, recommended back spacing for wheel is 4 1/2″.

Bulletproof Suspension only uses the best when manufacturing your kit, We use A36 Steel Plate 1/4″ thick or thicker and heavy wall DOM, Seamless steel tubing, and continuous seam welding.

Bulletproof Suspension’s 10″ 12″ SUV Kit for 2007-2013 GM models uses a one piece lift cage that is truss re-enforced, and heavy duty coil spacers, differential drops for 4wd models, Upper Control arm drops, Impact bars, Upper Control arms with ball joints, upgraded tie rod ends (Heim joints) Steering brackets and extensions. The Bulletproof Suspension kit was designed to keep all angels as close to factory specs as possible to prevent any hard angels, binding or bump steering.  The Bulletproof Suspension kit will work with Stabilitrack and auto ride models.

*front drive shafts need to be extended 1 1/2 ”

*Cadillac and Denali Models require after market CV shafts, shafts can be purchased through Bulletproof Suspension.

*lift time warranty doesn’t cover wearable parts like, ball joints, bushings, Heim joints, Uniballs and shocks.

IMG_1001 Escalade 014

Bulletproof Suspension Kit Includes

  1. One Piece cage
  2. Upper Control Arms
  3. Upper Control Arm Drops
  4. Differential Drops
  5. Differential Cross Member
  6. Impact bars
  7. Upper Control Arm Cross Member
  8. Steering Bracket
  9. Steering Linkage
  10. Steel Braided Brake Lines
  11. 4 Link Drop Downs
  12. Coil Spacers
  13. Pan-hard Extension
  14. Pan-hard Support Link
  15. 4 Link Tie in Plate
  16. Sway Bar Links
  17. Complete Hardware Kit

Bulletproof Pics 014

Required Parts:

  1. Bulletproof Kit                                                                     $4,250.00
  2. Standard Rear Shocks                                                       $59.00 x 2
  3. Total Cost complete kit                                                       $4,368.00

Upgrade Options:

  1. Bulletproof Remote Res Shocks                                      $275.00 x 2
  2. Bulletproof Coil Overs/Springs                                         $775.00 x 2
  3. Uniball A-Arms                                                                 $250.00 (set)
  4. Billet Shocks clamps                                                        $25.00 x 4
  5. Escalade/Denali CV front shaft                                        $495.00

Shipping charges and Tax’s that may apply are not included in above pricing

To find more information  please  visit: www.bulletproofsuspension.net or give us a call at 909.389.0444
By Bulletproof Suspension Inc. Posted in Uncategorized

Think Before Ordering A Suspension Lift Kit


Recently off road riding has been blown out enormously and the manufacturers of off road accessories are doing market their products for rough-and-tumble vehicles, sometimes even going as far as presenting their trucks splashing through muddy Hill roads and running through the rivers shown in the TV advertisements. The fact is many of those advertisements do not reflect the pros and cons of the kit perfectly. So before purchasing any lift kit, you need to think of the lift kit systems available on the market.

Suspension Lift Kits:

Suspension system consists of shock absorbers, coil over, springs, and other related parts that attached to the wheels to the rest of the truck/car. The suspension system is accountable for keeping the vehicle relatively constant while stirring on the road. A standard suspension system for trucks and SUVs, are often highly fitted to city or highway driving also on off road. A lift kit allows truck owners to raise the suspension of their vehicles with a higher clearance. Lift kits are generally installed by experts, but truck owners with the right experience and tools can absolutely complete this modification themselves.

Selecting the Lift Kit:

To choose a lift kit system dramatically depends on your budget & the quality you want. You have to keep in mind all of the attributes when deciding your final purchase. Now let’s check out some features useful in buying a lift kited for your trucks or SUV’s. When you are going to buy a lift on your truck or SUV’s the first thing that you need to think that your kit must be fitted with your Trucks and SUVs. Ideally rated coil springs, combined with your choice of specially tuned shock absorbers, provide unmatched ride quality and handling, both on-road and on the trails. Bushings should wear resistant. If all the parts are covered with the powder coat that would be great. The wear resistant bushing can play an important role in the off road riding. Kits should be designed in a way where no welding is required and it should be entirely built on. We need to think about the warranty and guarantee of the product. No doubt we should go forward to the life time transferable warranty.

Required kits:

To lift a truck there are some necessary kits and at the same time some optional/upgrade kits. Necessary kits are the accessories that are really important to run the kits and if we want to upgrade the kits then we need to think about an upgrade. A lift allows for your tires to have better articulations (up and down range) so you can run over rocks and keep the body straight. It also raises the body up enough so when you come down on a rock from your front tires, your body will not hang up on it. Therefore to make a name in the off-road riding, customers are tending to use lift kits to make the mule look distinct and attractive.

Bulletproof Suspension

1316 Agate Avenue, Suite-E Mentone, CA 92359

http://ezinearticles.com/?Think-Before-Ordering-A-Suspension-Lift-Kit&id=8035557

By Bulletproof Suspension Inc. Posted in Uncategorized